DRO for milling machine&lathe machine(LD-100)
Features:
1. Zero reset
2. 1/2 calculation, locating work piece center
3. MM/INCH conversion
4. INC/ABS conversion
5. Linear error correction
6. Segmental error correction
Technical Data:
Voltage: DC 9V
Power: Less than 8W
Input signal: TTL Square wave
Resolution: 0.0005, 0.001, 0.005, 0.01, 0.1, 0.5 (mm)
Scale interface: DB-9 female interface is standard
Operating temperature: 0~40 degree
Dimension(mm): 104*77*35
G.W.: 2.2KG
LD series multi-function digital readouts can be installed on all kinds of lathe machine, drilling machine, milling machine, Video measuring system, Tool-presetter and so on, which can supply the positioning and metrology functions together with our linear scales.
We have digital readout system for 2 axis, 3 axis, 4 axis and EDM
Function:
1. Plastic body
2. 999 sets of SDM coordinate
3. Zero setting
4. 1/2 calculation, locating work piece center
5. Mm/inch conversion
6. INC/ABS conversion
7. Resolution selection:
0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05
8. Diameter/Radius selection
9. DIR: Setting the coordinate direction
10. Shrink function
11. Math. Calculating
12. Multiple machining functions:
(1) Bolt Circle machining
(2) R-angle
(3) Divide holes on an oblique line
(4) Machining on an oblique line
13. Setting and recalling a datum for machining
14. Error compensation: Linear compensation
15. Instant power failure memory
16. Power consumption: AC90V-245V
Specification:
A. LD200 two-axis digital readout
B. LD300 three- axis digital readouts
C. LD400 four-axis digital readout
D. LD300E appropriate for EDM machine only
E. Voltage: AC90V-240V
F. Dimension: 295mm*185mm*45mm
G. Weight: 2KG
H. Power: Less than 15W
I. Linear scale's signal: TTL square wave, RS422 end different wave, Frequency<2MHz, Current>1mA.
Audited Supplier 
){kind=link}
){kind=link}